Abstract
This document defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) provide an architectural and optional implementation interface to selected Physical Layer entities (PHY). The Physical Layer encodes frames for transmission and decodes received frames with the modulation specified for the speed of operation, transmission medium and supported link length. Other specified capabilities include: control and management protocols, and the provision of power over selected twisted pair PHY types.
General information
-
Status: PublishedPublication date: 2021-02Stage: International Standard to be revised [90.92]
-
Edition: 3Number of pages: 5139
-
Technical Committee :ISO/IEC JTC 1/SC 6ICS :35.110
- RSS updates
Amendments
Amendments are issued when it is found that new material may need to be added to an existing standardization document. They may also include editorial or technical corrections to be applied to the existing document.
Amendment 1
Physical layer specifications and management parameters for 2.5 Gb/s and 5 Gb/s operation over backplane
Edition 2021
Amendment 2
Physical layer and management parameters for power over Ethernet over 4 pairs
Edition 2021
Amendment 3
Media access control parameters for 50 Gb/s and physical layers and management parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s operation
Edition 2021
Amendment 4
Physical layers and management parameters for 50 Gb/s, 200 Gb/s, and 400 Gb/s operation over single‐mode fiber
Edition 2021
Amendment 5
Physical layers specifications and management parameters for 10 Mb/s operation and associated power delivery over a single balanced pair of conductors
Edition 2021
Amendment 8
Physical layer specifications and management parameters for 2.5 Gb/s, 5 Gb/s, and 10 Gb/s automotive electrical ethernet
Edition 2021
Amendment 9
Physical layer specifications and management parameters for 25 Gb/s and 50 Gb/s passive optical networks
Edition 2021
Amendment 11
Physical layers and management parameters for 100 Gb/s and 400 Gb/s operation over single-mode fiber at 100 Gb/s per wavelength
Edition 2022
Amendment 13
Physical layers and management parameters for 100 Gb/s operation over DWDM systems
Edition 2022
Life cycle
-
Previously
WithdrawnISO/IEC/IEEE 8802-3:2017
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 1:2017
WithdrawnISO/IEC/IEEE 8802-3:2017/Cor 1:2018
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 2:2017
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 3:2017
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 4:2017
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 5:2017
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 6:2018
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 7:2017
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 8:2018
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 9:2018
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 10:2019
WithdrawnISO/IEC/IEEE 8802-3:2017/Amd 11:2019
-
Now
-
00
Preliminary
-
10
Proposal
-
20
Preparatory
-
30
Committee
-
40
Enquiry
-
50
Approval
-
60
Publication
-
90
Review
-
95
Withdrawal
Amendments
Provide additional content; available for purchase; not included in the text of the existing standard.PublishedISO/IEC/IEEE 8802-3:2021/Amd 1:2021
PublishedISO/IEC/IEEE 8802-3:2021/Amd 2:2021
PublishedISO/IEC/IEEE 8802-3:2021/Amd 3:2021
PublishedISO/IEC/IEEE 8802-3:2021/Amd 4:2021
PublishedISO/IEC/IEEE 8802-3:2021/Amd 5:2021
PublishedISO/IEC/IEEE 8802-3:2021/Amd 6:2021
PublishedISO/IEC/IEEE 8802-3:2021/Amd 7:2021
PublishedISO/IEC/IEEE 8802-3:2021/Amd 8:2021
PublishedISO/IEC/IEEE 8802-3:2021/Amd 9:2021
PublishedISO/IEC/IEEE 8802-3:2021/Amd 10:2022
PublishedISO/IEC/IEEE 8802-3:2021/Amd 11:2022
PublishedISO/IEC/IEEE 8802-3:2021/Amd 12:2022
PublishedISO/IEC/IEEE 8802-3:2021/Amd 13:2022
PublishedISO/IEC/IEEE 8802-3:2021/Amd 14:2022
-
00
-
Will be replaced by
Under developmentISO/IEC/IEEE DIS 8802-3