This standard has been revised by ISO 1268-1:2001 | ISO 1268-2:2001 | ISO 1268-3:2000 | ISO 1268-5:2001 | ISO 1268-6:2002 | ISO 1268-7:2001 | ISO 1268-8:2004 | ISO 1268-9:2003 | ISO 1268-10:2005 | ISO 1268-11:2005
Abstract
Specification of standard procedures for the preparation of test plates for subsequent preparation of test specimens by bonding glass cloth or mats with low pressure thermosetting resins. Three methods are specified: Method A: Glass reinforcement and liquid resin with suitable catalyst or curing agent are moulded in a press mould under appropriate conditions. Method B: Glass reinforced prepregs are moulded in a press at a mould temperature higher than room temperature. Method C: The glass reinforcement is manually laminated with simultaneous impregnation with a resin containing a suitable catalyst or curing agent.
-
Status: WithdrawnPublication date: 1974-11
-
Edition: 1Number of pages: 6
-
- ICS :
- 83.120 Reinforced plastics
Life cycle
-
Now
-
Revised by
PublishedISO 1268-1:2001
PublishedISO 1268-2:2001
PublishedISO 1268-3:2000
PublishedISO 1268-5:2001
PublishedISO 1268-6:2002
PublishedISO 1268-7:2001
PublishedISO 1268-8:2004
PublishedISO 1268-9:2003
PublishedISO 1268-10:2005
PublishedISO 1268-11:2005
Got a question?
Check out our FAQs
Customer care
+41 22 749 08 88
Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)