Filter :
Standard and/or project under the direct responsibility of ISO/TC 76 Secretariat Stage ICS
Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification
95.99
Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification
95.99
Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification
60.60
Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification
95.99
Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification
95.99
Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification
60.60
Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and bottle caps
95.99
Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and caps
95.99
Transfusion equipment for medical use — Part 3: Blood-taking set
95.99
Transfusion equipment for medical use — Part 3: Blood-taking sets for single use
90.93
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use
95.99
Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed
90.92
Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed
50.00
Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus
90.92
Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus
50.00
Transfusion equipment for medical use
95.99
Glass syringes — Determination of extractable tungsten
60.60
Glass transfusion bottles for medical use — Chemical resistance
95.99
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
95.99
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
95.99
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers
90.20
Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers — Amendment 1
60.60
Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on labels and instruction leaflets
90.92
Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on labels and instruction leaflets
30.99
Plastics collapsible containers for human blood and blood components — Part 3: Blood bag systems with integrated features
90.92
Plastics collapsible containers for human blood and blood components — Part 3: Blood bag systems with integrated features
30.99
Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features
90.92
Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features
30.99
Plastics collapsible containers for human blood and blood components
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification
60.60
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
95.99
Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification
60.60
Single use blood specimen containers up to 25 ml capacity
95.99
Single-use containers for venous blood specimen collection
95.99
Single-use containers for human venous blood specimen collection
90.93
In vitro diagnostic medical devices — Single-use containers for the collection of specimens from humans other than blood
60.60
Injection containers for injectables and accessories — Part 1: Injection vials made of glass tubing
95.99
Injection containers and accessories — Part 1: Injection vials made of glass tubing
95.99
Injection containers and accessories — Part 1: Injection vials made of glass tubing
95.99
Injection containers and accessories — Part 1: Injection vials made of glass tubing — Amendment 1
95.99
Injection containers and accessories — Part 1: Injection vials made of glass tubing
90.93
Injection containers for injectables and accessories — Part 2: Closures for injection vials
95.99
Injection containers and accessories — Part 2: Closures for injection vials
95.99
Injection containers and accessories — Part 2: Closures for injection vials
95.99
Injection containers and accessories — Part 2: Closures for injection vials — Amendment 1
95.99
Injection containers and accessories — Part 2: Closures for injection vials
60.60
Injection containers for injectables and accessories — Part 3: Aluminium caps for injection vials
95.99
Injection containers and accessories — Part 3: Aluminium caps for injection vials
90.93
Injection containers for injectables and accessories — Part 4: Injection vials made of moulded glass
95.99
Injection containers and accessories — Part 4: Injection vials made of moulded glass
95.99
Injection containers and accessories — Part 4: Injection vials made of moulded glass
90.93
Injection containers for injectables and accessories — Part 5: Freeze drying closures for injection vials
95.99
Injection containers and accessories — Part 5: Freeze drying closures for injection vials
95.99
Injection containers and accessories — Part 5: Freeze drying closures for injection vials
90.93
Injection containers for injectables and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
95.99
Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
90.93
Injection containers for injectables and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
95.99
Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
90.93
Risk management of particulate contamination for devices with intravascular access
60.60
Infusion equipment for medical use — Part 1: Infusion glass bottles
95.99
Infusion equipment for medical use — Part 1: Infusion glass bottles
95.99
Infusion equipment for medical use — Part 1: Infusion glass bottles — Amendment 1
95.99
Infusion equipment for medical use — Part 1: Infusion glass bottles
95.99
Infusion equipment for medical use — Part 1: Infusion glass bottles
90.93
Infusion equipment for medical use — Part 2: Closures for infusion bottles
95.99
Infusion equipment for medical use — Part 2: Closures for infusion bottles
95.99
Infusion equipment for medical use — Part 2: Closures for infusion bottles — Technical Corrigendum 1
95.99
Infusion equipment for medical use — Part 2: Closures for infusion bottles
95.99
Infusion equipment for medical use — Part 2: Closures for infusion bottles
60.60
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles
95.99
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles
95.99
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles
90.20
Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles — Amendment 1
60.60
Infusion equipment for medical use — Part 4: Infusion sets for single use
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed — Amendment 1
95.99
Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed
90.20
Infusion equipment for medical use — Part 5: Burette type infusion sets
95.99
Infusion equipment for medical use — Part 5: Burette infusion sets for single use, gravity feed
90.92
Infusion equipment for medical use — Part 5: Burette infusion sets for single use, gravity feed
20.00
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
95.99
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
95.99
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
90.92
Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
40.60
Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
95.99
Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
95.99
Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
90.20
Infusion equipment for medical use — Part 8: Infusion equipment for use with pressure infusion apparatus
95.99
Infusion equipment for medical use — Part 8: Infusion sets for single use with pressure infusion apparatus
90.93
Infusion equipment for medical use — Part 9: Fluid lines for use with pressure infusion equipment
95.99
Infusion equipment for medical use — Part 9: Fluid lines for single use with pressure infusion equipment
90.93
Infusion equipment for medical use — Part 10: Accessories for fluid lines for use with pressure infusion equipment
95.99
Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with pressure infusion equipment
90.93
Infusion equipment for medical use — Part 11: Infusion filters for use with pressure infusion equipment
95.99
Infusion equipment for medical use — Part 11: Infusion filters for single use with pressure infusion equipment
90.93
Infusion equipment for medical use — Part 12: Check valves
95.99
Infusion equipment for medical use — Part 12: Check valves — Amendment 1
95.99
Infusion equipment for medical use — Part 12: Check valves for single use
60.60
Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact
95.99
Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact
60.60
Infusion equipment for medical use — Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
90.93
Infusion equipment for medical use — Part 15: Light-protective infusion sets for single use
60.60
Infusion equipment for medical use — Part 15: Light-protective infusion sets for single use — Amendment 1
60.60
Infusion equipment for medical use — Part 16: Infusion sets for single use with volumetric infusion controllers
40.20
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates
90.20
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization
95.99
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization — Amendment 1
95.99
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization
60.60
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count
90.20
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count — Amendment 1
60.60
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 4: Biological requirements and test methods
90.93
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
95.99
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
90.92
Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
40.60
Elastomeric parts for aqueous parenteral preparations
95.99
Elastomeric parts for aqueous parenteral preparations
95.99
Elastomeric parts for aqueous parenteral preparations — Amendment 1
95.99
Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods
95.99
Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods
95.99
Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials — General requirements and test methods
60.60
Injection equipment for medical use — Part 1: Ampoules for injectables
95.99
Injection equipment for medical use — Part 1: Ampoules for injectables
95.99
Injection equipment for medical use — Part 1: Ampoules for injectables
95.99
Injection equipment for medical use — Part 1: Ampoules for injectables
90.93
Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules
95.99
Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules
90.93
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
95.99
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
95.99
Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
95.99
Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges
95.99
Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges
90.93
Prefilled syringes — Part 2: Plungers and discs for dental local anaesthetic cartridges
95.99
Prefilled syringes — Part 2: Plunger stoppers for dental local anaesthetic cartridges
90.93
Prefilled syringes — Part 3: Aluminium caps for dental local anaesthetic cartridges
95.99
Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges
90.92
Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges
20.60
Prefilled syringes — Part 4: Glass barrels for injectables
95.99
Prefilled syringes — Part 4: Glass barrels for injectables
95.99
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
95.99
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling — Amendment 1
95.99
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
60.60
Prefilled syringes — Part 5: Plungers for injectables
95.99
Prefilled syringes — Part 5: Plungers for injectables
95.99
Prefilled syringes — Part 5: Plunger stoppers for injectables
90.92
Prefilled syringes — Part 5: Plunger stoppers for injectables
20.00
Prefilled syringes — Part 6: Plastic barrels for injectables
95.99
Prefilled syringes — Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling
90.93
Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling
95.99
Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling
60.60
Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes
90.92
Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes
30.20
Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing bottles
95.99
Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles
95.99
Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles
90.93
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck bottles for syrups
95.99
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups
95.99
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups
90.93
Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups — Amendment 1
60.60
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck bottles (veral) for solid and liquid dosage forms
95.99
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
95.99
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
90.93
Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms — Amendment 1
60.60
Containers and accessories for pharmaceutical preparations — Part 4: Tablet bottles
95.99
Containers and accessories for pharmaceutical preparations — Part 4: Tablet glass bottles
90.93
Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies
95.99
Containers and accessories for pharmaceutical preparations — Part 5: Dropper assemblies
90.93
Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
95.99
Containers and accessories for pharmaceutical preparations — Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
90.93
Pen systems — Part 1: Glass cylinders for insulin pen-injectors
95.99
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
95.99
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
95.99
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
90.92
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
20.00
Pen systems — Part 2: Plungers and discs for pen-injectors for medical use
95.99
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
95.99
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use — Amendment 1
95.99
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
90.92
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
20.00
Pen systems — Part 3: Seals for pen-injectors for medical use
95.99
Pen systems — Part 3: Seals for pen-injectors for medical use
90.93
Disposable hanging devices for transfusion and infusion bottles — Requirements and test methods
90.93
Self-adhesive hanging devices for infusion bottles and injection vials — Requirements and test methods
90.20
Hanging devices for multiple use with infusion bottles — Requirements and test methods
95.99
Medical infusion bottles — Suspension devices for multiple use — Requirements and test methods
90.93
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP)
95.99
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
95.99
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP)
95.99
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
90.93
Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) — Amendment 1: Climate action changes
60.60
Plastics containers for intravenous injection
95.99
Plastic containers for intravenous injections
95.99
Plastic containers for intravenous injections
90.92
Plastic containers for intravenous injections
30.99
Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the Blow-Fill-Seal (BFS) process
95.99
Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
90.93
Medical devices — Infusate compatibility — Requirements and assessment methods
20.00
Medical devices — Pump tube spallation test — General procedure
60.60
Sterile packaged ready for filling glass cartridges
90.92
Sterile packaged ready for filling glass cartridges — Amendment 1
30.98
Sterile packaged ready for filling glass cartridges
20.00
Sterile packaged ready for filling glass vials
90.92
Sterile packaged ready for filling glass vials
20.00
Transfer sets for pharmaceutical preparations — Requirements and test methods
95.99
Transfer sets for pharmaceutical preparations — Requirements and test methods
95.99
Transfer sets for pharmaceutical preparations — Requirements and test methods
60.60
Medical devices — Transfusion set and blood bag compatibility test method
90.93
Aerosol bacterial retention test method for air-inlet filter on administration devices
60.60
Snap-on bottles for metering pumps — Part 1: Tubular glass
60.60
Snap-on bottles for metering pumps — Part 2: Moulded glass
60.60
Snap-on bottles for metering pumps — Part 3: Plastic
60.60
General requirements for Luer activated valves (LAVs) incorporated into medical devices for intravascular applications
20.00
Medical devices — Non-electrically driven portable infusion devices
95.99
Medical devices — Non-electrically driven portable infusion devices
60.60

No matching records found. Please try changing the filter settings.