Draft International Standard
ISO/DIS 9239-1
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
Reference number
ISO/DIS 9239-1
Версия 4
Draft
International Standard
Предпросмотр
u
ISO/DIS 9239-1
84924
недоступно на русском языке
Проект данного международного стандарта находится на этапе рассмотрения членами ИСО.
Текущее издание: ISO 9239-1:2010

ISO/DIS 9239-1

ISO/DIS 9239-1
84924
Формат
Язык
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This part of ISO 9239 specifies a method for assessing the wind-opposed burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Annex A gives details of assessing the smoke development, when required. This method is applicable to all types of flooring, e.g. textile carpet, cork, wood, rubber and plastics coverings as well as coatings. Results obtained by this method reflect the performance of the flooring, including any substrate if used. Modifications of the backing, bonding to a substrate, underlay or other changes of the flooring may affect test results. This part of ISO 9239 is applicable to the measurement and description of the properties of floorings in response to heat and flame under controlled laboratory conditions. It should not be used alone to describe or appraise the fire hazard or fire risk of floorings under actual fire conditions. Information on the precision of the test method is given in Annex B.

Общая информация

  •  : В стадии разработки

    You can help develop this draft international standard by contacting your national member

    : Начало голосования по проекту между-народно-го стандарта: 3 мес. [40.20]
  •  : 4
  • ISO/TC 92/SC 1
    97.150  13.220.40 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)