Reference number
ISO 5628:2019
© ISO 2024
International Standard
ISO 5628:2019
Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
Edition 3
2019-05
Preview
недоступно на русском языке
Опубликовано (Версия 3, 2019)
Последний раз этот публикация был пересмотрен в  2024. Поэтому данная версия остается актуальной.

ISO 5628:2019

Язык
Формат
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the two-point, three-point and four-point bending test methods.

For paper and paperboard in a low thickness range, the two-point bending method and the three-point bending method are suitable.

For corrugated fibreboard and board with a higher thickness, the four-point bending method is recommended.

The measurement conditions are defined in such a way that the test piece is not subjected to any significant permanent deformation during the test, nor is the range of validity of the formulae for calculating the bending stiffness exceeded.

In these bending tests, the test pieces of paper and board are regarded as "beams" as defined by the science of the strength of materials, see Reference [2].

Общая информация

  • Текущий статус
     : Опубликовано
    Дата публикации
     : 2019-05
    Этап
    : Подтверждение действия международного стандарта [90.93]
  • Версия
     : 3
  • Технический комитет :
    ISO/TC 6/SC 2
    ICS :
    85.060 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

  2. Интернет-магазин
  3. Каталог стандартов
  4. МКС
  5. 85
  6. 85.060
  7. ISO 5628:2019