Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 20/SC 10 Секретариата Этап ICS
Aircraft — Pressure cabin ground test connections
95.99
Aircraft — Ground pressure testing connections for pressure cabins
90.93
Aerospace — Pipelines — Identification scheme
95.99
Aerospace — Pipelines — Identification
90.93
Aircraft — Pressure refuelling connections
95.99
Aircraft — Gravity filling orifices
95.99
Aircraft — Pressure re-oiling connection
90.93
Aircraft water-methanol pressure connections
90.93
Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (old type) — Dimensions (Inch series) (Not valid for new designs)
95.99
Gaseous oxygen replenishment couplings for aircraft
95.99
Aircraft — High pressure air charging valves
95.99
Aircraft — Liquid oxygen replenishment couplings — Mating dimensions
95.99
Aircraft — Liquid oxygen replenishment couplings — Mating dimensions
90.93
Aircraft — Elastomeric sealing rings — Packaging and identification
95.99
Gaseous breathing oxygen supplies for aircraft
90.93
Compressed non-breathing air for use in aircraft
90.93
Nitrogen for use in aircraft
90.93
Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings
95.99
Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings
90.93
Aerospace — Tubing — Outside diameters and thicknesses — Metric dimensions
90.92
Aerospace — Tubing — Outside diameters and thicknesses — Metric dimensions
30.99
Aircraft — Connections for checking hydraulic systems by ground appliances
95.99
Aircraft — Connections for checking hydraulic systems by ground appliances — Threaded type
90.93
Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved
95.99
Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved
90.92
Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved
40.60
Aerospace — Hydraulic power pack — General specification
20.98
Aerospace series — Brushed DC motor pumps — General specification
20.98
Aerospace — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
95.99
Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
90.92
Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
40.99
Aerospace — Fluid systems and components — Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
95.99
Aerospace series — Fluid systems and components — Methods for system sampling and measuring the solid particle contamination in hydraulic fluids
60.60
Aircraft — Joints for connecting crew members' regulator masks to oxygen sources
95.99
Aerospace construction — Fluid systems and components — Pressure and temperature classifications
95.99
Aerospace — Fluid systems and components — Pressure and temperature classifications
95.99
Aerospace — Fluid systems and components — Pressure and temperature classifications
90.93
Aerospace fluid systems — Impulse testing of hydraulic hose, tubing and fittings assemblies
95.99
Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies
95.99
Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies
90.93
Aerospace fluid systems — Thermal shock testing of piping and fittings
95.99
Aerospace — Fluid systems — Thermal shock testing of piping and fittings
90.93
Aerospace construction — Separable tube fittings for fluid systems — General specification
95.99
Aerospace fluid systems — Separable tube fittings for 24 degrees cone — General specification
95.99
Aerospace — Separable tube fittings for fluid systems, 24 degrees cone — General specification
95.99
Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/metric
95.99
Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/metric
90.93
Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test
95.99
Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test
90.93
Polytetrafluoroethylene (PTFE) tubing for aerospace applications — Methods for the determination of the density and relative density
90.93
Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
95.99
Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE)
60.60
Aerospace — Fluid systems — Hose assembly, metal
95.99
Aerospace — Fluid systems — Hose assembly, metal
95.99
Aerospace — Fluid systems — Metal hose assemblies
90.93
Aerospace — "P" clamps (loop clamps) for fluid tubing installations — Dimensions
95.99
Aerospace — "P" clamps (loop clamps) for fluid systems — Envelope dimensions
90.93
Aerospace construction — Fluid systems — Interface of metric couplings
95.99
Aerospace — Fluid systems — Interface of 24 degree cone metric couplings
95.99
Aerospace — Fluid systems — Interface of 24° cone metric couplings
60.60
Aerospace — Fluid systems port connection, seal and fitting end — Dimensions
95.99
Aerospace — Couplings, threaded and sealed, for fluid systems — Dimensions
95.99
Aerospace — Couplings, threaded and sealed, for fluid systems — Dimensions
60.60
Aerospace — Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing — Metric series
90.92
Aerospace — Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing — Metric series
30.99
Aerospace fluid systems and components — Vocabulary — Part 1: Hose assemblies
90.93
Aerospace fluid systems and components — Vocabulary — Part 2: Fittings and couplings
60.60
Aerospace — Omega clamps (saddle clamps) for fluid tubing installations — Dimensions
95.99
Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions
95.99
Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions
95.99
Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions
60.60
Aerospace — Hydraulic, pressure compensated, variable delivery pumps — General requirements
95.99
Aerospace series — Hydraulic, pressure compensated, variable delivery pumps — General requirements
90.93
Aerospace — "Q" clamps (centre-mounted clamps) for fluid systems — Dimensions
90.93
Aerospace — Hydraulic system tubing — Qualification tests
95.99
Aerospace — Hydraulic system tubing — Qualification tests for bent tubes
90.93
Aerospace — Fluid systems — Hydraulic system tubing
95.99
Aerospace — Fluid systems — Hydraulic system tubing
90.92
Aerospace — Fluid systems — Hydraulic system tubing
30.99
Aerospace — Fluid systems — Vocabulary — Part 1: General terms and definitions related to pressure
95.99
Aerospace — Fluid systems — Vocabulary — Part 1: General terms and definitions related to pressure
60.60
Aerospace — Fluid systems — Vocabulary — Part 2: General terms and definitions relating to flow
95.99
Aerospace — Fluid systems — Vocabulary — Part 2: General terms and definitions relating to flow
60.60
Aerospace — Fluid systems — Vocabulary — Part 3: General terms and definitions relating to temperature
95.99
Aerospace — Fluid systems — Vocabulary — Part 3: General terms and definitions relating to temperature
60.60
Aerospace — Fluid systems — Vocabulary — Part 4: General terms and definitions relating to control/actuation systems
90.93
Aerospace — Fluid systems — Vocabulary — Part 4: General terms and definitions relating to control/actuation systems
30.98
Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (new type) — Dimensions (Inch series)
90.93
Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 1: Metallic (stainless steel) braid
90.93
Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 2: Non-metallic braid
90.93
Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies — Test methods
95.99
Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification
95.99
Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification — Technical Corrigendum 1
95.99
Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification
95.99
Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification
90.92
Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification
30.99
Aerospace — Constant displacement hydraulic motors — General specifications
95.99
Aerospace series — Constant displacement hydraulic motors — General specifications
95.99
Aerospace — Fixed displacement hydraulic motors — General specifications
60.60
Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification
95.99
Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification — Technical Corrigendum 1
95.99
Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification
95.99
Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 °C/21 000 kPa — Procurement specification
60.60
Aerospace — Hydraulic tubing joints and fittings — Planar flexure test
95.99
Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test
90.92
Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test
30.99
Aerospace — Fluid systems — Dimensions of plastic protective caps and plugs
90.93
Aerospace — Clamps for fluid systems — Test methods
90.93
Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa — Procurement specification
95.99
Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa — Procurement specification
95.99
Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 °C/28 000 kPa — Procurement specification
60.60
Aerospace — Pressure re-oiling connection (new type)
90.93
Aerospace series — Fluid, hydraulic, phosphate ester-base, fire resistant — Technical specification
90.93
Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa — Procurement specification
95.99
Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10 500 kPa — Technical specifications and requirements
90.20
Aerospace fluid systems — Test methods for tube/fitting assemblies
90.92
Aerospace fluid systems — Test methods for tube/fitting assemblies
40.99
Aerospace — Hydraulic system fluid contamination — Location of sampling points and criteria for sampling
95.99
Aerospace — Cleanliness classification for hydraulic fluids
95.99
Aerospace — Cleanliness classification for hydraulic fluids
90.93
Aerospace — Part numbering for hose assemblies
90.93
Aerospace — 'P' (loop style) clamps — Procurement specification
90.93
Aerospace — Constant displacement hydraulic motors — General specifications for 35 000 kPa systems
95.99
Aerospace — Hydraulic, pressure-compensated, variable delivery pumps — General requirement for 35 000 kPa systems
95.99
Aircraft — Tubing tolerances — Inch series
90.93
Aerospace — Hydraulic fluid components — Expression of particulate contamination levels
90.93
Aerospace series — Hydraulic filter elements — Test methods — Part 1: Test sequence
90.93
Aerospace series — Hydraulic filter elements — Test methods — Part 2: Conditioning
90.93
Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity
90.92
Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity
30.60
Aerospace series — Hydraulic filter elements — Test methods — Part 4: Verification of collapse/burst pressure rating
90.93
Aerospace series — Hydraulic filter elements — Test methods — Part 5: Resistance to flow fatigue
90.93
Aerospace series — Hydraulic filter elements — Test methods — Part 6: Initial cleanliness level
90.93
Aerospace fluid systems — O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes — Part 1: Close tolerances for hydraulic systems
90.93
Aerospace fluid systems — O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes — Part 2: Standard tolerances for non-hydraulic systems
90.93
Aerospace series — Terminology for clamping devices
90.93
Aerospace series — AC induction electric motor driven, variable delivery, hydraulic pumps — General requirements
90.92
Aerospace series — AC induction electric motor driven, variable delivery, hydraulic pumps — General requirements
30.99
Aerospace — Linear hydraulic utility actuator — General specifications
60.60
Aerospace series — Titanium tube for 35 MPa operating pressure — Part 1: Inch series
90.93
Aerospace series — Tube fittings for fluid systems, 5 080 psi (35 000 kPa) — Qualification specification
90.93
Aerospace series — Fitting end, 24° internal cone, external thread, flareless type extra fine thread pitch inch series — Design standard
90.93
Aerospace — Electrohydrostatic actuator (EHA) — Characteristics to be defined in procurement specifications
95.99
Aerospace — Electrohydrostatic actuator (EHA) — Characteristics to be defined in procurement specifications
90.20
Aerospace — Hydraulic power transfer units — General specifications
90.93
Aerospace fluid systems and components — Variable displacement hydraulic motors — General specifications
60.60
Aerospace series — Pipe coupling 8°30' — Dynamic beam seal end for ferrule, welded — Geometric configuration
60.60
Aerospace series — Pipe coupling 8°30' — Dynamic beam seal end for elbows, tees and crosses — Geometric configuration
60.60
Aerospace series — Pipe coupling 8°30' — Thread end — Geometric configuration
60.60
Aerospace series — Pipe coupling 8°30' in titanium alloy — Nut for welded ferrule
95.99
Aerospace series — Pipe coupling 8°30' in titanium alloy — Thrust wires
95.99
Aerospace series — O-ring grooves — Dimensions
90.93
Aerospace series — O-ring grooves — Dimensions — Amendment 1
60.60
Aerospace — Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) — Procurement specification
90.93
Aircraft — Environmental test procedures for airborne fluid system components — Resistance to fire in designated fire zones
90.93
Aerospace — Metric series pipe coupling 8°30' up to 28 000 kPa dynamic beam seal — Technical specification
60.60
Aerospace fluid systems — Elastomer seals — Storage and shelf life
90.92
Aerospace fluid systems — Elastomer seals — Storage and shelf life
40.98
Aerospace fluid systems — Elastomer seals — Storage and shelf life
40.60

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.