Gas meters in buildings, смотри 91.140.40
Water meters in buildings, смотри 91.140.60
Фильтр :
Стандарт и/или проект Этап ТК
Withdrawal of ISO/R 541-1967
95.99 ISO/TC 30
Withdrawal of ISO/R 781-1968
95.99 ISO/TC 30
Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements
95.99 ISO/TC 30/SC 2
Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements
90.93 ISO/TC 30/SC 2
Measurement of water flow in closed conduits — Tracer methods — Part 1: General
90.93 ISO/TC 30/SC 5
Measurement of water flow in closed conduits — Tracer methods — Part 2: Constant rate injection method using non-radioactive tracers
90.93 ISO/TC 30/SC 5
Measurement of water flow in closed conduits — Tracer methods — Part 3: Constant rate injection method using radioactive tracers
90.93 ISO/TC 30/SC 5
Measurement of water flow in closed conduits — Tracer methods — Part 6: Transit time method using non-radioactive tracers
90.93 ISO/TC 30/SC 5
Measurement of water flow in closed conduits — Tracer methods — Part 7: Transit time method using radioactive tracers
90.93 ISO/TC 30/SC 5
Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes, in particular in the case of sinusoidal or square wave intermittent periodic-type fluctuations
95.99 ISO/TC 30
Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes
95.99 ISO/TC 30/SC 2
Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
95.99 ISO/TC 30/SC 2
Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
90.93 ISO/TC 30/SC 2
Measurement of clean water flow in closed conduits — Velocity-area method using current-meters
95.99 ISO/TC 30
Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions
95.99 ISO/TC 30/SC 5
Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions
90.20 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
90.92 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Vocabulary and symbols
95.99 ISO/TC 30
Measurement of fluid flow in closed conduits — Vocabulary and symbols
90.93 ISO/TC 30
Measurement of gas flow in conduits — Tracer methods — Part 1: General
95.99 ISO/TC 30/SC 5
Measurement of gas flow in conduits — Tracer methods — Part 4: Transit time method using radioactive tracers
95.99 ISO/TC 30/SC 5
Measurement of liquid flow in closed conduits — Weighing method
90.93 ISO/TC 30
Measurement of liquid flow in closed conduits — Weighing method — Technical Corrigendum 1
60.60 ISO/TC 30
Measurement of fluid flow by means of pressure differential devices — Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices — Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full — Amendment 1
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices — Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full — Technical Corrigendum 1: (Applies to French version only)
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements
60.60 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 2: Orifice plates
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 2: Orifice plates
60.60 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles
60.60 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 4: Venturi tubes
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 4: Venturi tubes
60.60 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters
60.60 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters
60.60 ISO/TC 30/SC 2
Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
95.99 ISO/TC 30
Measurement of fluid flow — Estimation of uncertainty of a flow-rate measurement
95.99 ISO/TC 30
Measurement of fluid flow — Evaluation of uncertainties
95.99 ISO/TC 30
Measurement of fluid flow — Procedures for the evaluation of uncertainties
90.93 ISO/TC 30
Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
95.99 ISO/TC 30/SC 5
Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
95.99 ISO/TC 30
Assessment of uncertainty in the calibration and use of flow measurement devices — Part 1: Linear calibration relationships
95.99 ISO/TC 30
Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
90.93 ISO/TC 30
Determination of flowrate of fluids in closed conduits of circular cross-section — Method of velocity measurement at one point of the cross-section
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
90.20 ISO/TC 30/SC 5
Measurement of liquid flow in closed conduits — Method by collection of the liquid in a volumetric tank
90.93 ISO/TC 30
Measurement of fluid flow in closed conduits — Methods of evaluating the performance of electromagnetic flow-meters for liquids
95.99 ISO/TC 30/SC 5
Measurement of gas flow by means of critical flow Venturi nozzles
95.99 ISO/TC 30/SC 2
Measurement of gas flow by means of critical flow Venturi nozzles
95.99 ISO/TC 30/SC 2
Measurement of gas flow by means of critical flow nozzles
60.60 ISO/TC 30/SC 2
Measurement of liquid flow in closed conduits by the weighing method — Procedures for checking installations — Part 1: Static weighing systems
90.93 ISO/TC 30
Guidelines for the use of ISO 5167-1:1991
95.99 ISO/TC 30/SC 2
Guidelines for the use of ISO 5167:2003
90.92 ISO/TC 30/SC 2
Measurement of free surface flow in closed conduits — Part 1: Methods
95.99 ISO/TC 113/SC 1
Measurement of free surface flow in closed conduits — Part 2: Equipment
95.99 ISO/TC 113/SC 5
Hydrometry — Measurement of free surface flow in closed conduits
60.60 ISO/TC 113/SC 1
Measurement of gas flow in closed conduits — Turbine meters
90.93 ISO/TC 30
Measurement of gas flow in closed conduits — Turbine meters — Technical Corrigendum 1
60.60 ISO/TC 30
Measurement of fluid flow in closed conduits — Coriolis mass flowmeters
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements) — Amendment 1: Guidelines for gas measurement
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
90.93 ISO/TC 30/SC 5
Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
90.93 ISO/TC 30/SC 2
Measurement of fluid flow — Methods of specifying flowmeter performance
90.93 ISO/TC 30
Measurement of fluid flow in closed conduits — Ultrasonic transit-time meters for liquid
90.93 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
90.20 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Methods using transit-time ultrasonic flowmeters
95.99 ISO/TC 30/SC 5
Measurement of fluid flow by means of pressure-differential devices — Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure differential devices — Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
90.92 ISO/TC 30/SC 2
Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
95.99 ISO/TC 30/SC 5
Stationary source emissions — Determination of the volume flowrate of gas streams in ducts — Automated method
90.93 ISO/TC 146/SC 1
Measurement of fluid flow in closed conduits — Thermal mass flowmeters
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Thermal mass flowmeters
60.60 ISO/TC 30/SC 5
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1 — Technical Corrigendum 1
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
95.99 ISO/TC 30/SC 2
Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
90.92 ISO/TC 30/SC 2
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement
95.99 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Ultrasonic meters for gas — Part 1: Meters for custody transfer and allocation measurement
60.60 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications
90.20 ISO/TC 30/SC 5
Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids
90.20 ISO/TC 30/SC 5
Measurement of fluid flow rate in closed conduits — Radioactive Tracer Methods
40.20 ISO/TC 30/SC 5

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.