Subcommittee Subcommittee Title Published standards Standards under development
ISO/TC 17/SC 1 Methods of determination of chemical composition 59 2
ISO/TC 17/SC 3 Steels for structural purposes 33 3
ISO/TC 17/SC 4 Heat treatable and alloy steels 28 4
ISO/TC 17/SC 7 Methods of testing (other than mechanical tests and chemical analysis) 16 3
ISO/TC 17/SC 9 Tinplate and blackplate 3 3
ISO/TC 17/SC 10 Steel for pressure purposes 17 0
ISO/TC 17/SC 11 Steel castings 21 13
ISO/TC 17/SC 12 Continuous mill flat rolled products 32 2
ISO/TC 17/SC 15 Railway rails, rails fasteners, wheels and wheelsets 15 0
ISO/TC 17/SC 16 Steels for the reinforcement and prestressing of concrete 25 6
ISO/TC 17/SC 17 Steel wire rod and wire products 22 1
ISO/TC 17/SC 19 Technical delivery conditions for steel tubes for pressure purposes 35 0
ISO/TC 17/SC 20 General technical delivery conditions, sampling and mechanical testing methods 7 0
Filter :
Standard and/or project under the direct responsibility of ISO/TC 17 Secretariat Stage ICS
Title missing
95.99
Selection and preparation of samples and test pieces of wrought steels — Part 2: Samples for the determination of the chemical composition
95.99
Dimensions of hot-rolled steel sections — Part 1: Equal-leg angles — Metric series — Dimensions and sectional properties
95.99
Dimensions of hot-rolled steel sections — Part 2: Unequal-leg angles — Metric series — Dimensions and sectional properties
95.99
Dimensions of hot-rolled steel sections — Part 3: Equal-leg angles — Inch series — Dimensions and sectional properties
95.99
Dimensions of hot-rolled steel sections — Part 4: Unequal-leg angles — Inch series — Dimensions and sectional properties
95.99
Dimensions of hot-rolled steel sections — Part 7: Parallel flange I-beams — Inch series — Dimensions and sectional properties
95.99
Dimensions of hot-rolled steel sections — Part 9: Parallel flange column sections — Inch series — Dimensions and sectional properties
95.99
Hot-rolled steel sections — Part 13: Tolerances on sloping flange beam, column and channel sections
95.99
Railway rolling stock material — Part 1: Rough-rolled tyres for tractive and trailing stock — Quality requirements
95.99
Railway rolling stock material — Part 2: Rough tyres for trailer stock — Dimensions and tolerances
95.99
Railway rolling stock material — Part 4: Rolled or forged wheel centres for tyred wheels for trailer stock
95.99
Railway rolling stock material — Part 5: Cast wheel centres in non-alloy steel for tyred wheels for trailer stock
95.99
Railway rolling stock material — Part 6: Solid wheels for tractive and trailing stock — Quality requirements
95.99
Single cold-reduced tinplate and single cold-reduced blackplate — Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet
95.99
Single cold-reduced tinplate and single cold-reduced blackplate — Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form
95.99
Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels
95.99
Steel products for pressure purposes — Derivation and verification of elevated temperature properties — Part 1: Yield or proof stress of carbon and low alloy steel products
95.99
Steel products for pressure purposes — Derivation and verification of elevated temperature properties — Part 2: Proof stress of austenitic steel products
95.99
Steels and cast iron — Determination of phosphorus — Spectrophotometric method
95.99
Tinplate and blackplate — Minimum packaging requirements
95.99
Ferrous products — Heat treatments — Vocabulary
95.99
Ferrous materials — Heat treatments — Vocabulary
95.99
Ferrous materials — Heat treatments — Vocabulary
60.60
Steels — Classification — Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition
90.93
Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics
90.93
Steel names based on letter symbols
95.99
Steel names based on letter symbols
95.99
Steel names based on letter symbols
90.93
Double cold-reduced electrolytic tinplate — Part 1: Sheet
95.99
Double cold-reduced electrolytic tinplate — Part 2: Coil for subsequent cutting into sheets
95.99
Railway rolling stock material — Ultrasonic acceptance testing
95.99
Steel products — Definitions and classification
95.99
Steel products — Vocabulary
90.93
Basic rules for specifying impact strength in steel specifications
95.99
Single cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets
95.99
Double cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets
95.99
Calculation method of carbon dioxide emission intensity from iron and steel production — Part 1: Steel plant with blast furnace
90.93
Calculation method of carbon dioxide emission intensity from iron and steel production — Part 2: Steel plant with electric arc furnace (EAF)
90.93
Calculation method of carbon dioxide emission intensity from iron and steel production — Part 3: Steel plant with electric arc furnace (EAF) and coal-based or gas-based direct reduction iron (DRI) facility
90.92
Calculation method of carbon dioxide emission intensity from iron and steel production — Part 3: Steel plant with electric arc furnace (EAF) and coal-based or gas-based direct reduction iron (DRI) facility
10.99
Calculation method of carbon dioxide emission intensity from iron and steel production — Part 4: Guidance for using the ISO 14404 series
60.60
Life cycle inventory calculation methodology for steel products
60.60

No matching records found. Please try changing the filter settings.